Set or Change IP Addresses, Gateways, Subnet Masks, and DNS Servers Remotely in Windows

Frist of all you'll have to download  pstools 

Find out  the following  blog   http://it-toolkit.blogspot.com and copy pstools to your C Drive like below screen shot

Open up  the command prompt then  type below command

cd c:\pstools

psexec.exe \\ip_or_hostname cmd.exe

ex:  psexec.exe \\192.168.100.155 cmd.exe

if you have defendant  credentials you can use following command with username and password

psexec.exe \\ip_or_hostname -u workgroup\username -p password  cmd.exe  

Ex:-  psexec.exe \\192.168.100.155  -u workgroup\administrator -p password@123  cmd.exe

·         Show status of the network card

C:\>netsh interface ip show config

·         Change  ip address , sub-net and default gateway 

c:\>netsh interface ip set address "Local Area Connection" static 192.168.0.10 255.255.255.0  192.168.0.1 1

·         Interface set DHCP  IP address, gateway, and sub-net mask to be received by DHCP server

c:\>netsh interface ip set address name="Local Area Connection" source=dhcp

·        
Add DNS address  

c:\>netsh interface ip set dns "Local Area Connection 4 " static 10.25.16.1

·         Add secondary or additional DNS server:

 c:\>netsh interface ip add dns "Local Area Connection" 10.25.16.1 

·         Remove  existing DNS form the interface 

c:\>netsh interface ip delete  dns "Local Area Connection" 10.25.16.5